Bolt for bottom of square shaft for Artiglio Master 24/26

Description

Item # 2-03157 This bolt holds the bracket from the transmission to the square shaft. Will break or bend when too much pressure is applied to the lower bead breaker. Easily replaced. Two bolts are required. Loosen 17 mm nuts behind square shaft and remove old bolts. Be sure to keep it tight. When replacing both, remember to keep the cam bushing in the transmission plate groove. If the bead breaker arm can move loosely back and forth, then the cam bushing is not in the groove. You should be able to see it through the access hole above the pedal assembly.